http://www.cubic.com

Ground Combat Training Systems

	Field Maintenance Reports: KSI Rework AT4 Simulator Rework Helmet Packing M249 In-Repair Instructions TDTC/PC Cable Rework DPCU Flex Cable Fix CT-TDTD Time Synch Frequently Asked Questions
AT4 SIMULATOR ASSEMBLY DRAWING 147751 SITE REWORK Click on the thumbnail to enlarge

2. Using syringe, apply RTV in the Sight Channel along the right front side of Sight. Make certain that Sight channel is filled with RTV.	3. Using syringe, apply RTV in the Sight channel along the left front side of Sight. Make certain that Sight channel is filled with RTV.	4. Using syringe, apply RTV in the Sight channel along the bottom front of Sight. Make certain that Sight channel is filled with RTV.
5. Allow RTV applied to front of Sight to dry for approximately five (5) minutes before proceeding.	6. Using syringe, apply RTV in the Sight channel along the right rear side of Sight. Make certain that Sight channel is filled with RTV.	7. Using syringe, apply RTV in the Sight Channel along the left side of Sight. Make certain that Sight channel is filled with RTV.
8. Using syringe, apply RTV in the Sight channel along the bottom rear side of Sight. Make certain that Sight channel is filled with RTV.	9. Allow RTV applied to front of Sight to dry for approximately five (5) minutes before proceeding.	10. Remove excess RTV from top edge of front and rear sight. Air cure for 72 hours.